336-965-3730 ryanrouth@yahoo.com

Download Pricing Sheet as PDF

Price Sheet- Our constant goal is to make reroofing and repairs as quick and simple as possible, and like most, by posting all of our pricing here online we hope that it will help speed your decision-making and expedite fulfilling your needs. Likewise we wish to take the confusion out of pricing so there are no surprises and customers cannot be taken advantage of with ambiguous billing. Our set pricing system has for decades allowed for contractors to estimate their projects beforehand and call for installation without hesitation.   We will always gladly come out and price any project for anyone, which may render a slightly more or less price depending on access, other site variables and square computation.

Price quote for installing a new roof in Guilford County                Free

Price quote and inspection outside Guilford County                       $20

Roof inspection for real-estate closing in Greensboro                    $20

Roof inspection for real-estate closing in Guilford County             $30

Roof inspection for real-estate closing surrounding county          $40

Service call in Greensboro caulking minor items under 7 pitch    $60

Service call in Greensboro caulking minor items over 7 pitch       $90

Service call in Guilford County to caulk items under 7 pitch         $80

Service call in Guilford County to caulk items over 7 pitch                        $110

Service call to surrounding county caulking under 7 pitch                        $100

Service call to surrounding county caulking over 7 pitch               $130

Add a rubber gasket sleeve to a pipe to service add                        $20 ea.

Add installation of complete new pipe collar over existing            $30 ea.

Add installation of new pipe collar in place of existing add            $40 ea.

Add installing new shingle tabs or caps missing to serv. call          $5 ea.

Add installation of a piece of metal over a hole in deck add          $10 ea.

Add installation of new wood deck per square foot add                $20 sq ft

Addition of metal step flashing where missing or needed              $10 per pc

Addition of triangular metal counter-flashing to brick                    $20 each

Addition of straight metal on face or wall per foot                          $5 per ft

Addition of drip edge metal at perimeter to seal edge                    $2 per ft.

Addition of a rubber patch or seam tape per foot on flat              $10 per ft

Addition of heat welded thermoplastic patch or seam cover       $15 per ft

Addition of torch applied modified asphalt patch 6 inch wide     $20 per ft

Add a water diverter above problem area appx. 2 by 4 inch        $5per ft

Replacement slates copper clipped where missing                          $25 ea

Replacement hand split cedar shakes face nailed were missing   $10 ea

Replacement saw cedar shingles face nailed where missing         $5 ea

Ceramic or concrete tile must be located to match and then priced.

The following is labor pricing for installing shingles but is subject to change.

Determine square footage and pitch of all areas to calculate all aspects.

Pricing is for complete projects of 10 squares or more not for small/repairs.

Site with no driveway or disallowed access next to structure-min$10 per sq.

This labor is for standard 30 yr shingle install; thicker add min $5.00 per sq

4-6 pitch labor upcharge for each additional story over 1                        $10 per sq.

4-6 pitch roof labor to install shingles  or caps                                  $30 per sq

4-6 pitch roof labor to install black paper/felt underlayment       $ 5 per sq

4-6 pitch labor to remove, dispose and clean up                              $30 per sq

4-6 pitch labor only to install or tie into existing wall flashing       $2 per ft

4-6 pitch labor only to install straight headwall or counterflashing $3 per ft

4-6 pitch labor only to install a box vent, gas vent or pipe collar             $10 each

4-6 pitch labor only to install ridgevent and 2x if cutting required $2 per ft

4-6 pitch labor to replace a skylight, powervent(no wiring) or turbine $50 ea

4-6 pitch labor and material to reflash 5 linear feet of chimney or wall   $80

4-6 pitch labor and material to reflash 8 linear feet of chimney or wall   $100

4-6 pitch labor and material to reflash 12 linear feet of chimney or wall $150

4-6 pitch normally counterflashing is surface mounted to cut brick add $5 per ft

4-6 pitch labor and material to change ½ inch plywood or OSB              $3 per sq ft

4-6 pitch labor and material to change 1 by 6 boards                    $3 per linear ft

4-6 pitch labor to install drip edge metal on perimeter                  .10 cents per ft

4-6 pitch labor to install ice and water shield sticky underlayment         $1 linear ft

4-6 pitch labor upcharge for each additional story over 1                                    $10 per sq.

4-6 pitch labor for weaving valley, to account for roof complexity        $1 per ft

7 pitch labor to layout roof and install shingles, starters and caps          $33 per sq

7 pitch labor to install black paper/ felt or underlayment                          $7 per sq

7 pitch labor to remove one layer of shingles, dispose and cleanup       $33 per sq

7 pitch labor to install ice and water shield sticky membrane                   $2 linear ft

7 pitch labor to install drip edge on perimeter                                              $.50 per ft

7 pitch labor to install or tie-in to existing wall flashing                              $2.50 ft

7 pitch labor to weave valleys to compensate for roof complexity         $1.50 per ft

7 pitch labor to cut in around box vent, gas vent, vent or pipe collar    $12 each

7 pitch labor only to install ridgevent and 2x if cutting also required     $2.25 ft

7 pitch labor to replace a skylight, powervent(no wiring) or turbine     $12 each

7 pitch labor only to install straight headwall or counter-flashing           $3.50 ft

7 pitch labor and material to flash 5 linear feet of chimney or wall        $100

7 pitch labor and material to flash 8 linear feet of chimney or wall        $120

7 pitch labor and material to flash 12 linear feet of chimney or wall      $170

7 pitch normally counter-flashing is surface mounted to cut brick add $7 per ft

7 pitch labor and material to change bad ½ inch OSB or plywood          $4 per sq ft

7 pitch labor and material to change bad 1 by 6 boards                $4 per linear ft

7 pitch labor upcharge for each additional story over 1                $12 per sq

8 pitch labor to layout roof and install shingles, starters and caps          $36 per sq

8 pitch labor to install black paper/ felt or underlayment                          $8 per sq

8 pitch labor to remove one layer of shingles, dispose and cleanup       $36 per sq

8 pitch labor to install ice and water shield sticky membrane                   $2 linear ft

8 pitch labor to install drip edge on perimeter                                              $.50 per ft

8 pitch labor to install or tie-in to existing wall flashing                              $2.75 ft

8 pitch labor to weave valleys to compensate for roof complexity         $1.75 per ft

8 pitch labor to cut in around box vent, gas vent, vent or pipe collar    $13 each

8 pitch labor only to install ridgevent and 2x if cutting also required     $2.50 ft

8 pitch labor to replace a skylight, powervent(no wiring) or turbine     $12 each

8 pitch labor only to install straight headwall or counter-flashing           $3.75 ft

8 pitch labor and material to flash 5 linear feet of chimney or wall        $110

8 pitch labor and material to flash 8 linear feet of chimney or wall        $1300

8 pitch labor and material to flash 12 linear feet of chimney or wall      $180

8 pitch normally counter-flashing is surface mounted to cut brick add $8 per ft

8 pitch labor and material to change bad ½ inch OSB or plywood          $4 per sq ft

8 pitch labor and material to change bad 1 by 6 boards                $4 per linear ft

8 pitch labor upcharge for each additional story over 1                $12 per sq

9 pitch labor to layout roof and install shingles, starters and caps          $40 per sq

9 pitch labor to install black paper/ felt or underlayment                          $9 per sq

9 pitch labor to remove one layer of shingles, dispose and cleanup       $40 per sq

9 pitch labor to install ice and water shield sticky membrane                   $2 linear ft

9 pitch labor to install drip edge on perimeter                                              $.75 per ft

9 pitch labor to install or tie-in to existing wall flashing                              $3.00 ft

9 pitch labor to weave valleys to compensate for roof complexity         $2.00 per ft

9 pitch labor to cut in around box vent, gas vent, vent or pipe collar    $14 each

9 pitch labor only to install ridgevent and 2x if cutting also required     $2.50 ft

9 pitch labor to replace a skylight, powervent(no wiring) or turbine     $15 each

9 pitch labor only to install straight headwall or counter-flashing           $4.00 ft

9 pitch labor and material to flash 5 linear feet of chimney or wall        $120

9 pitch labor and material to flash 8 linear feet of chimney or wall        $140

9 pitch labor and material to flash 12 linear feet of chimney or wall      $190

9 pitch normally counter-flashing is surface mounted to cut brick add $8 per ft

9 pitch labor and material to change bad ½ inch OSB or plywood$4.50 per sq ft

9 pitch labor and material to change bad 1 by 6 boards                $4.50 per linear ft

9 pitch labor upcharge for each additional story over 1                $14 per sq

10 pitch labor to layout roof and install shingles, starters and caps        $45 per sq

10 pitch labor to install black paper/ felt or underlayment                       $10 per sq

10 pitch labor to remove one layer of shingles, dispose and cleanup    $45 per sq

10 pitch labor to install ice and water shield sticky membrane                $3 linear ft

10 pitch labor to install drip edge on perimeter                                            $.75 per ft

10 pitch labor to install or tie-in to existing wall flashing                            $3.50 ft

10 pitch labor to weave valleys to compensate for roof complexity      $2.50 per ft

10 pitch labor to cut in around box vent, gas vent, vent or pipe collar  $15 each

10 pitch labor only to install ridgevent and 2x if cutting also required   $2.75 ft

10 pitch labor to replace a skylight, powervent(no wiring) or turbine  $16 each

10 pitch labor only to install straight headwall or counter-flashing        $4.50 ft

10 pitch labor and material to flash 5 linear feet of chimney or wall      $130

10 pitch labor and material to flash 8 linear feet of chimney or wall      $150

10 pitch labor and material to flash 12 linear feet of chimney or wall   $200

10 pitch normally counter-flashing is surface mounted to cut brick add$9 per ft

10 pitch labor and material to change bad ½ inch OSB or plywood       $5 per sq ft

10 pitch labor and material to change bad 1 by 6 boards              $5 per linear ft

10 pitch labor upcharge for each additional story over 1              $14 per sq

12 pitch labor to layout roof and install shingles, starters and caps        $50 per sq

12 pitch labor to install black paper/ felt or underlayment                       $12 per sq

12 pitch labor to remove one layer of shingles, dispose and cleanup    $50per sq

12 pitch labor to install ice and water shield sticky membrane                $4 linear ft

12 pitch labor to install drip edge on perimeter                                            $1 per ft

12 pitch labor to install or tie-in to existing wall flashing                            $4.00 ft

12 pitch labor to weave valleys to compensate for roof complexity      $2.50 per ft

12 pitch labor to cut in around box vent, gas vent, vent or pipe collar  $15 each

12 pitch labor only to install ridgevent and 2x if cutting also required   $3.50 ft

12 pitch labor to replace a skylight, powervent(no wiring) or turbine  $17 each

12 pitch labor only to install straight headwall or counter-flashing        $4.50 ft

12 pitch labor and material to flash 5 linear feet of chimney or wall      $150

12 pitch labor and material to flash 8 linear feet of chimney or wall      $170

12 pitch labor and material to flash 12 linear feet of chimney or wall   $220

12 pitch normally counter-flashing is surface mounted to cut brick add$10 per ft

12 pitch labor and material to change bad ½ inch OSB or plywood       $6 per sq ft

12 pitch labor and material to change bad 1 by 6 boards              $6 per linear ft

12 pitch labor upcharge for each additional story over 1              $16 per sq

14 pitch labor to layout roof and install shingles, starters and caps        $55 per sq

14 pitch labor to install black paper/ felt or underlayment                       $15 per sq

14 pitch labor to remove one layer of shingles, dispose and cleanup    $55 per sq

14 pitch labor to install ice and water shield sticky membrane                $5 linear ft

14 pitch labor to install drip edge on perimeter                                            $2 per ft

14 pitch labor to install or tie-in to existing wall flashing                            $4.50 ft

14 pitch labor to weave valleys to compensate for roof complexity      $3.00 per ft

14 pitch labor to cut in around box vent, gas vent, vent or pipe collar  $18 each

14 pitch labor only to install ridgevent and 2x if cutting also required   $4.00 ft

14 pitch labor to replace a skylight, powervent(no wiring) or turbine  $20 each

14 pitch labor only to install straight headwall or counter-flashing        $5.00 ft

14 pitch labor and material to flash 5 linear feet of chimney or wall      $160

14 pitch labor and material to flash 8 linear feet of chimney or wall      $180

14 pitch labor and material to flash 12 linear feet of chimney or wall   $230

14 pitch normally counter-flashing is surface mounted to cut brick add$12 per ft

14 pitch labor and material to change bad ½ inch OSB or plywood       $8 per sq ft

14 pitch labor and material to change bad 1 by 6 boards              $8 per linear ft

14 pitch labor upcharge for each additional story over 1              $18 per sq

20 pitch labor to layout roof and install shingles, starters and caps        $70 per sq

20 pitch labor to install black paper/ felt or underlayment                       $20 per sq

20 pitch labor to remove one layer of shingles, dispose and cleanup    $70 per sq

20 pitch labor to install ice and water shield sticky membrane                $5 linear ft

20 pitch labor to install drip edge on perimeter                                            $3 per ft

20 pitch labor to install or tie-in to existing wall flashing                            $4.00 ft

20 pitch labor to weave valleys to compensate for roof complexity      $5.00 per ft

20 pitch labor to cut in around box vent, gas vent, vent or pipe collar  $30 each

20 pitch labor only to install ridgevent and 2x if cutting also required   $5.00 ft

20 pitch labor to replace a skylight, powervent(no wiring) or turbine  $30 each

20 pitch labor only to install straight headwall or counter-flashing        $6.00 ft

20 pitch labor and material to flash 5 linear feet of chimney or wall      $180

20 pitch labor and material to flash 8 linear feet of chimney or wall      $200

20 pitch labor and material to flash 12 linear feet of chimney or wall   $250

20 pitch normally counter-flashing is surface mounted to cut brick add$14 per ft

20 pitch labor and material to change bad ½ inch OSB or plywood       $10 per sq ft

20 pitch labor and material to change bad 1 by 6 boards              $10 per linear ft

20 pitch labor upcharge for each additional story over 1              $20 per sq

Some material item cost and optional items-

OSHA safety harness required usage add per phase take off/roofing    $10 per sq

Labor to cut a hole for a vent/powervent/pipe or skylight                        $25 each

Materials for metal step flashing                                                                       .35 each

Material cost for triangular cut counter flashing                                          $2.00 each

Material for square fronter/headwall/dormer face metal                         $3.00 per ft

Material for Ice and Water shield/sticky membrane                                   $3.00 per ft

Material for plastic cap over ridgevent                                                            $2.50 per ft

Material for 15 lb black paper felt/underlayment                                        $5.00 per sq

Material for nails to install roof-applies to new construction                    $1.00 per sq

Flat Roof System Base Pricing For Open Field-

Again prices apply to large commercial projects 10 squares or more.

Prices are just for open field material and install, with no edge or protrusions cost.

Widely varying perimeter designs must be quoted as well as protrusions.

Perimeter treatment can be from $2 to $40 per foot from bar to coping.

Protrusion can be from $20 pipe to $500 HVAC unit junction.

Systems are priced for 1 story buildings, for each additional floor add   $50 per sq

Torch applied modified asphalt only over old or new base sheet            $200 per sq.

Heat welded thermoplastic (TPO) only over smooth wood or metal     $225 per sq

Rubber(EPDM) fully adhered to existing rubber or over smooth surface$250per sq

Asphalt hot mop three-ply built-up system to new wood w/ basesheet $300persq

To add a ½ inch black board insulation screwed to wood or metal add            $60 per sq

Polystyrene, polyisocyanurate and all other base sheets and insulations must be priced separately as material pricing, fastening and substrates fluctuate.